11. ETFA 2006:
Prague,
Czech Republic
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2006, September 20-22, 2006, Diplomat Hotel Prague, Czech Republic.
IEEE 2006 BibTeX
- Patrick Meumeu Yomsi, Yves Sorel:
Non-Schedulability Conditions for Off-line Scheduling of Real-Time Systems Subject to Precedence and Strict Periodicity Constraints.
Electronic Edition (link) BibTeX
- Karim Traore, Emmanuel Grolleau, Ahmed Rahni, Michaël Richard:
Response-Time Analysis of tasks with offsets.
Electronic Edition (link) BibTeX
- Marco Antolovic, Kristen Acton, Naveen Kalappa, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury:
PLC Communication using PROFINET: Experimental Results and Analysis.
Electronic Edition (link) BibTeX
- Isidro Calvo, Luís Almeida:
Adding Synchronous Scheduling to CORBA-RT.
1-8
Electronic Edition (link) BibTeX
- Luciana Rech, Carlos Montez, Rômulo Silva de Oliveira:
A Clone-Pair Approach for the Determination of the Itinerary of Imprecise Mobile Agents with Firm Deadlines.
9-15
Electronic Edition (link) BibTeX
- Paulo S. Motta Pires, Ivano Miranda dos Anjos:
Improvements on Ethernet LAN Network Infrastructure for Industrial Automation: a Case Study.
16-22
Electronic Edition (link) BibTeX
- Yuxin Su, Chunhong Zheng, Peter C. Müller:
A Simple Linear Velocity Estimator for High-Precision Motion Control.
23-29
Electronic Edition (link) BibTeX
- Tarik Khoutaif, Guy Juanole:
Formal modelling and evaluation of the data transfer phase of the ACL links on the WPAN Bluetooth.
30-37
Electronic Edition (link) BibTeX
- Ricardo Moraes, Paulo Portugal, Francisco Vasques:
A Stochastic Petri Net Model for the Simulation Analysis of the IEEE 802.11e EDCA Communication Protocol.
38-45
Electronic Edition (link) BibTeX
- Paulo Bartolomeu, José Alberto Fonseca, Paulo Maria Rodrigues, Luís Miguel Girão:
Evaluating the Timeliness of Bluetooth ACL Connections for the Wireless Transmission of MIDI.
46-53
Electronic Edition (link) BibTeX
- Urban Bilstrup, Katrin Bilstrup, Bertil Svensson, Per-Arne Wiberg:
Using Dual-Radio Nodes to Enable Quality of Service in a Clustered Wireless Mesh Network.
54-61
Electronic Edition (link) BibTeX
- Jean-Luc Béchennec, Mikaël Briday, Sébastien Faucou, Yvon Trinquet:
Trampoline An Open Source Implementation of the OSEK/VDX RTOS Specification.
62-69
Electronic Edition (link) BibTeX
- Sven Gestegard Robertz, Dan Henriksson, Anton Cervin:
Memory-Aware Feedback Scheduling of Control Tasks.
70-77
Electronic Edition (link) BibTeX
- Martin Skambraks:
An Architecture for Runtime State Restoration after Transient Hardware-Faults in Redundant Real-Time Systems.
78-85
Electronic Edition (link) BibTeX
- Alain Girault, Huafeng Yu:
A flexible method to tolerate value sensor failures.
86-93
Electronic Edition (link) BibTeX
- Beng Siong Lim, Geok Hong Phua, Leck Leng Aw, ZhongQiang Ding, Hao Zeng, Hao He:
Multi-sensor electrode setup verification and diagnostics system for EDM Operation.
94-101
Electronic Edition (link) BibTeX
- Ondrej Spinka, Jan Krakora, Michal Sojka, Zdenek Hanzálek:
Los-Cost Avionics System for Ultra-Light Aircrafts.
102-109
Electronic Edition (link) BibTeX
- Jit Biswas, Victor Foo Siang Fook, Qiang Qiu, Maniyeri Jayachandran, Aung Aung Phyo Wai, Pham Viet Thang, That Mon Htwe:
Data Collection and Feature Extraction for a Smart Ward Application.
110-115
Electronic Edition (link) BibTeX
- Seth Yang En Tan, Eng Soon Loh, Toon Tien Foo, Woon Shin Chong, Chum Mok Puah, Beng Siong Lim:
A micro-fluidic level sensing and dispensing system for large-scale stem cell experimentations.
116-123
Electronic Edition (link) BibTeX
- Hugo Marcondes, Arliones Stevert Hoeller, Lucas Francisco Wanner, Antônio Augusto Fröhlich:
Operating Systems Portability: 8 bits and beyond.
124-130
Electronic Edition (link) BibTeX
- Manuel G. Gericota, Luís F. Lemos, Gustavo R. Alves, Mario M. Barbosa, José M. Ferreira:
A Framework for Fault Tolerant Real Time Systems Based on Reconfigurable FPGAs.
131-138
Electronic Edition (link) BibTeX
- F. Santos, J. Trovao, A. Marques, Paulo Pedreiras, Joaquim Ferreira, Luís Almeida, M. Santos:
A Modular Control Architecture for a Small Electric Vehicle.
139-144
Electronic Edition (link) BibTeX
- Marcos Vinicius Linhares, Alexandre Jose da Silva, Rômulo Silva de Oliveira:
Empirical Evaluation of SysML through the Modeling of an Industrial Automation Unit.
145-152
Electronic Edition (link) BibTeX
- Antti Pakonen, Teppo Pirttioja, Ilkka Seilonen, Teemu Tommila:
Proactive Computing in Process Monitoring: Information Agents for Operator Support.
153-158
Electronic Edition (link) BibTeX
- J. Muller, U. Epple:
A Generic Information Model for an XML-based Device Profile of Pumps.
159-166
Electronic Edition (link) BibTeX
- Reiner F. Perozzo, Carlos Eduardo Pereira:
Framework for Building Supervisory Systems in Mobile Devices.
167-172
Electronic Edition (link) BibTeX
- Virgilio Gilart-Iglesias, Francisco Maciá Pérez, Francisco Jose Mora-Gimeno, José Vicente Berná-Martínez:
Normalization of Industrial Machinery with Embedded Devices and SOA.
173-180
Electronic Edition (link) BibTeX
- Salvatore Cavalieri:
Outdoor Localisation in a Wireless LAN.
181-188
Electronic Edition (link) BibTeX
- Mogens Mathiesen, R. Indergaard, H. Vefling, Niels D. Aakvaag:
Trial Implementation of a Wireless Human Machine Interface to Field Devices.
189-193
Electronic Edition (link) BibTeX
- William D. Henderson, Steven Tron:
Verification of The Minimum Cost Forwarding Protocol for Wireless Sensor Networks.
194-201
Electronic Edition (link) BibTeX
- Ricardo Moraes, Paulo Portugal, Francisco Vasques:
Simulation Analysis of the IEEE 802.11e EDCA Protocol for an Industrially-Relevant Real-Time Communication Scenario.
202-209
Electronic Edition (link) BibTeX
- HyungTae Kim, HaeJeong Yang, SungChul Kim:
Nano Control Algorithm for Grinding and Polishing Aspherical Surface.
210-216
Electronic Edition (link) BibTeX
- Mourad Ahmane, Laurent Truffet:
State Feedback Control via Positive Invariance for Max-plus Linear Systems using *-algorithm.
217-224
Electronic Edition (link) BibTeX
- Agnelo Denis Vieira, José Eduardo Ribeiro Cury, Max Hering de Queiroz:
A Model for PLC Implementation of Supervisory Control of Discrete Event Systems.
225-232
Electronic Edition (link) BibTeX
- Carlos Andrés, Pedro Gomez, José Pedro García-Sabater:
Comparing dispatching rules in dynamic hybrid flow shops.
233-239
Electronic Edition (link) BibTeX
- Tay Jin Chua, F. Y. Wang, Tian Xiang Cai, Xiao-Feng Yin:
A Heuristics-based Advanced Planning and Scheduling System with Bottleneck Scheduling Algorithm.
240-247
Electronic Edition (link) BibTeX
- Hiroshi Yajima, Shinichi Matsumoto, Ryoichi Sasaki:
Proposal of Risk Communications Supporting Method in Multiplex Risk Communicator.
255-260
Electronic Edition (link) BibTeX
- Horst F. Wedde, Sanjeev K. Taneja, Sebastian Lehnhoff, Michael ten Hompel, D. Liekenbrock, S. Libert:
Distributed Integrated Scheduling in Automated Manufacturing Systems with Transient Machine Failures.
261-269
Electronic Edition (link) BibTeX
- Jackson Francomme, Gilles Mercier, Thierry Val:
A simple method for guaranteed deadline of periodic messages in 802.15.4 cluster cells for control automation applications.
270-277
Electronic Edition (link) BibTeX
- Mario Neugebauer, Joern Ploennigs, Klaus Kabitzsch:
Analysis of Duty Cycle Adaptation in Wireless Sensor Networks.
278-285
Electronic Edition (link) BibTeX
- R. Morales-Ramos, Juan A. Montiel-Nelson, H. Milosiu, R. Berenguer, A. Garcia-Alonso:
Adjustable Voltage Sensors for Power Supply Chains in Passive UHF RFID Transponders.
286-291
Electronic Edition (link) BibTeX
- Mihai Marin-Perianu, T. J. Hofmeijer, Paul J. M. Havinga:
Implementing Business Rules on Sensor Nodes.
292-299
Electronic Edition (link) BibTeX
- Manuel Díaz, Daniel Garrido, Luis Llopis, Bartolomé Rubio, José M. Troya:
A Component Framework for Wireless Sensor and Actor Networks.
300-307
Electronic Edition (link) BibTeX
- Mingqing Hu, Andrea Boni:
An Improved Reduced Set Method to Control the Run-time Complexity of SVM in Wireless Sensor Networks.
308-313
Electronic Edition (link) BibTeX
- Carsten Buschmann, Dennis Pfisterer, Stefan Fischer:
Estimating Distances Using Neighborhood Intersection.
314-321
Electronic Edition (link) BibTeX
- Hassan Kaghazchi, Ronan Joyce, Donal Heffernan:
Function Blocks for Fieldbus Diagnostics.
322-327
Electronic Edition (link) BibTeX
- Fabian Koch, Kai T. Hansen:
Redundancy Performance of Virtual Network Solutions.
328-332
Electronic Edition (link) BibTeX
- Alberto Elia, Luca Ferrarini, Carlo Veber:
Analysis of Ethernet-based safe automation networks according to IEC 61508.
333-340
Electronic Edition (link) BibTeX
- Bradley Triden, Siddharth Mantri, Kyle Schroeder, Aditya Thomas, James R. Moyne, Dawn M. Tilbury:
Dedicated vs. Shared Networks for Safety and Controls: An analysis of the trade-offs involved.
341-347
Electronic Edition (link) BibTeX
- José Rufino, Paulo Veríssimo, Carlos Almeida, Guilherme Arroz:
Integrating Inaccessibility Control and Timer Management in CANELy.
348-355
Electronic Edition (link) BibTeX
- Dirk Missal, Hans-Michael Hanisch:
Synthesis of Distributed Controllers by Means of a Monolithic Approach.
356-363
Electronic Edition (link) BibTeX
- Jeffrey Ashley, Lawrence E. Holloway:
Exploiting causal structure in the refined diagnosis of condition systems.
364-371
Electronic Edition (link) BibTeX
- Jürgen Greifeneder, Georg Frey:
Optimizing Quality of Control in Networked Automation Systems using Probabilistic Models.
372-379
Electronic Edition (link) BibTeX
- Gaelle Marsal, Bruno Denis, Jean-Marc Faure, Georg Frey:
Evaluation of Response Time in Ethernet-based Automation Systems.
380-387
Electronic Edition (link) BibTeX
- Carlos C. Insaurralde, Miguel A. Seminario, Juan F. Jimenez, Jose M. Giron-Sierra:
IEC 61499 Model for Avionics Distributed Fuel Systems with Networked Embedded Holonic Controllers.
388-396
Electronic Edition (link) BibTeX
- Liliana Cucu, Joël Goossens:
Feasibility Intervals for Fixed-Priority Real-Time Scheduling on Uniform Multiprocessors.
397-404
Electronic Edition (link) BibTeX
- Lamine Bougueroua, Hui Xue Zhao, Laurent George, Serge Midonnet:
Execution Overrun Management for Fixed-Priority Preemptive Scheduling of Sporadic Graph Tasks.
413-420
Electronic Edition (link) BibTeX
- Dimitar Kazakov, Iain Bate:
Towards New Methods for Developing Real-Time Systems: Automatically Deriving Loop Bounds Using Machine Learning.
421-428
Electronic Edition (link) BibTeX
- Paolo Ferrari, Alessandra Flammini, Daniele Marioli, Andrea Taroni, Francesco Venturini:
Experimental analysis to estimate jitter in PROFINET IO Class 1 networks.
429-432
Electronic Edition (link) BibTeX
- Margaret Naughton, Donal Heffernan, Gabriel Leen:
Use of Timed Automata Models in the Design of Real-time Control Network Elements.
433-436
Electronic Edition (link) BibTeX
- Michel Baud, Max Felser:
Profinet IO-Device Emulator based on the Man-in-the-middle Attack.
437-440
Electronic Edition (link) BibTeX
- Iacopo Carreras, Daniele Miorandi, Stefano Vitturi:
Performance of an Application Layer Protocol for Wireless Industrial Communications.
441-444
Electronic Edition (link) BibTeX
- Stefan Knauth, D. Kaslin, Rolf Kistler, Alexander Klapproth:
UPnP Compression for IP based Field Devices in Building Automation.
445-448
Electronic Edition (link) BibTeX
- Lucia Lo Bello, Giordano A. Kaczynski, Thomas Nolte:
Towards a robust real-time wireless link in a land monitoring application.
449-452
Electronic Edition (link) BibTeX
- Giordano A. Kaczynski, Lucia Lo Bello, Thomas Nolte:
Towards stochastic response-time of hierarchically scheduled real-time tasks.
453-456
Electronic Edition (link) BibTeX
- Georg Neugschwandtner:
Towards Plug and Play in Home and Building Automation Networks.
461-464
Electronic Edition (link) BibTeX
- S. Ishida, C. Roesener, H. Nishi, J. Ichimura:
Discussion of Aspects in Energy Management with Demand Response System KNIVES.
465-468
Electronic Edition (link) BibTeX
- Enrico S. Canuto, Fabio Musso:
Embedded Model Control: Application to Web Winding. Part I: Modelling.
477-484
Electronic Edition (link) BibTeX
- Enrico S. Canuto, Fabio Musso:
Embedded Model Control: Application to Web Winding. Part II: Digital Control.
485-492
Electronic Edition (link) BibTeX
- Enrico S. Canuto, Fabio Musso:
Embedded Model Control: Application to Interferometric Metrology Lines.
493-500
Electronic Edition (link) BibTeX
- Sameh Refaat, Jacques M. Hervé, Saeid Nahavandi, Hieu Trinh:
High-Precision Five-Axis Machine for High-Speed Material Processing Using Linear Motors and Parallel-Serial Kinematics.
501-506
Electronic Edition (link) BibTeX
- Andrew Kusiak:
Innovation Science.
507-514
Electronic Edition (link) BibTeX
- B. J. Alvarez, P. Fernandez, S. Mateos, J. C. Rico, C. M. Suarez:
Accessibility Analysis for Automatic Inspection Using Bounding Volume Hierarchies.
515-522
Electronic Edition (link) BibTeX
- P. Fernandez, B. J. Alvarez, J. C. Rico, D. Blanco, G. Valino:
Constraints Evaluation and Working Methodology for Laser Scanning of Free-Form Surfaces.
523-530
Electronic Edition (link) BibTeX
- Ana Antunes, Fernando Morgado Dias, José Vieira, Alexandre Mota:
Delay Compensator: an Approach to Reduce the Variable Sampling to Actuation Delay Effect in Distributed Real-time Control Systems.
531-536
Electronic Edition (link) BibTeX
- Omar J. López Orozco, Jose L. Martinez Lastra:
Adding Function Blocks of IEC 61499 Semantic Description to Automation Objects.
537-544
Electronic Edition (link) BibTeX
- Luca Ferrarini, Carlo Veber, Arndt Lüder, Jörn Peschke, Athanasios P. Kalogeras, John V. Gialelis, J. Rode, D. Wunsch, V. Chapurlat:
Control Architecture for Reconfigurable Manufacturing Systems: the PABADIS'PROMISE approach.
545-552
Electronic Edition (link) BibTeX
- Ryosuke Saga, Naoto Okada, Hiroshi Tsuji:
Three Layered Business Process Architecture for Workflow Cooperation.
553-558
Electronic Edition (link) BibTeX
- C. D'Onofrio, M. Bruccoleri, U. La Commare:
Integrating Manufacturing Equipments Using a Shop Floor Control System.
559-566
Electronic Edition (link) BibTeX
- Toshiya Kaihara, Susumu Fujii:
A Study on Multi-Agent based Resource Allocation Mechanism for Automated Enterprise Contracting.
567-573
Electronic Edition (link) BibTeX
- John V. Gialelis, Athanasios P. Kalogeras, A. Kaklis, Stavros A. Koubias:
Collaborative Continuous Replenishment Planning Process Implementation Utilizing Web Services, Product Ontologies and Workflow Management Systems.
574-581
Electronic Edition (link) BibTeX
- Lucas Francisco Wanner, Arliones Stevert Hoeller, Augusto Born de Oliveira, Antônio Augusto Fröhlich:
Operating System Support for Data Acquisition in Sensor Networks.
582-585
Electronic Edition (link) BibTeX
- Christos D. Antonopoulos, Antonis Athanasopoulos, Stavros A. Koubias:
A simulation study on dropping tendencies of an ad-hoc wireless network.
586-589
Electronic Edition (link) BibTeX
- Y. Xiang, K. Zhang:
Advance in Multiply Sectioned Bayesian Networks: Sensor Network Practitioners' Perspective.
590-593
Electronic Edition (link) BibTeX
- Julio Barbancho, Carlos León, Francisco Javier Molina, Antonio Barbancho:
Giving neurons to sensors. QoS management in wireless sensors networks.
594-597
Electronic Edition (link) BibTeX
- Lucia Lo Bello, Orazio Mirabella:
Efficient Full Duplex Links for Long Distance Wireless Mesh Networks.
598-601
Electronic Edition (link) BibTeX
- Carlos De Marziani, Jesús Ureña, Manuel Mazo, Álvaro Hernández, Juan Jesús García, Ana Jiménez, María del Carmen Pérez, A. Ochoa, Jose M. Villadangos:
Relative Positioning System Using Simultaneous Round Trip Time of Flight Measurements.
602-605
Electronic Edition (link) BibTeX
- Kai T. Hansen:
Process Plant Reference Model for Communication.
606-610
Electronic Edition (link) BibTeX
- Danillo Moura Santos, Roberto de Matos, Antônio Augusto Fröhlich, Rafael Luiz Cancian:
Application-Oriented System Design as an Embedded Systems Development Strategy: a critical analysis.
615-618
Electronic Edition (link) BibTeX
- Roman Bartosinski, Zdenek Hanzálek, Libor Waszniowski, Petr Struzka:
Processor Expert Enhances Matlab Simulink Facilities for Embedded Software Rapid Development.
625-628
Electronic Edition (link) BibTeX
- Ralf Salomon, Matthias Schneider, Daniel Wehden:
Low-Cost Optical Indoor Localization System for Mobile Objects without Image Processing.
629-632
Electronic Edition (link) BibTeX
- Valeriy Vyatkin, Martin Hirsch, Hans-Michael Hanisch:
Systematic Design and Implementation of Distributed Controllers in Industrial Automation.
633-640
Electronic Edition (link) BibTeX
- Andrei Lobov, Corina Popescu, Jose L. Martinez Lastra:
An Algorithm for Siemens STL representation in TNCES.
641-647
Electronic Edition (link) BibTeX
- Hao He, Anton J. R. Aendenroomer, Beng Siong Lim:
Diner-Waiter Pattern for Time Critical Services.
648-654
Electronic Edition (link) BibTeX
- Jason J. Scarlett, Robert W. Brennan:
Re-evaluating Event-Triggered and Time-Triggered Systems.
655-661
Electronic Edition (link) BibTeX
- Matthias Riedl, Christian Diedrich, Frank Naumann:
SFC inside IEC 61499.
662-666
Electronic Edition (link) BibTeX
- Belynda Brahimi, Christophe Aubrun, Eric Rondeau:
Modelling and Simulation of Scheduling Policies Implemented in Ethernet Switch by Using Coloured Petri Nets.
667-674
Electronic Edition (link) BibTeX
- Alexandre Seuret, M. Termens-Ballester, A. Toguyeni, S. El Khattabi, Jean-Pierre Richard:
Implementation of an Internet-controlled system under variable delays.
675-680
Electronic Edition (link) BibTeX
- Shanbin Li, Dominique Sauter, Christophe Aubrun:
Robust Fault Isolation Filter Design for Networked Control Systems.
681-688
Electronic Edition (link) BibTeX
- Supat Klinkhieo, Chandra Kambhampati, Ronald J. Patton:
Information Packets and MPC Enable Fault-tolerance in Network Control.
689-694
Electronic Edition (link) BibTeX
- Alessandro Casavola, Giuseppe Franzè, Michela Sorbara:
Fault Tolerance Aspects in Networked Multi-area Power Systems.
695-702
Electronic Edition (link) BibTeX
- Jonathan M. Aitken, Tim Clarke:
Using Data Confluences in a Distributed Network with Social Monitoring to Identify Fault Conditions.
703-710
Electronic Edition (link) BibTeX
- Oscar Barambones, Aitor J. Garrido, F. J. Maseda, P. Alkorta:
Speed Sensorless Vector Control of Induction Motors Based on Robust Adaptive Variable Structure Control Law.
711-718
Electronic Edition (link) BibTeX
- N. Antequera, Matilde Santos, Jesús Manuel de la Cruz:
A Helicopter Control based on Eigenstructure Assignment.
719-724
Electronic Edition (link) BibTeX
- Fotis N. Koumboulis, Maria P. Tzamtzi, M. G. Skarpetis:
Finite Precision Controllers for Robust Pole Assignment of Linear Systems with Nonlinear Uncertain Structure.
725-732
Electronic Edition (link) BibTeX
- Fotis N. Koumboulis, George E. Panagiotakis:
Disturbance Rejection of General Linear Neutral Time Delay Systems, via Measurement Output Feedback.
733-742
Electronic Edition (link) BibTeX
- Mika Strmman, Seppo Sierla, Jukka Peltola, Kari Koskinen:
Professional designers' adaptations of IEC 61499 to their individual work practices.
743-749
Electronic Edition (link) BibTeX
- Arastoo Barji, Nils H. Hagge, Bernardo Wagner:
Comparative Study of Using CNet, IEC 61499, and Statecharts for Behavioral Models of Real-time Control Applications.
750-757
Electronic Edition (link) BibTeX
- Kleanthis Thramboulidis, Giannis Koumoutsos, G. Doukas:
Towards a Service-Oriented IEC 61499 compliant Engineering Support Environment.
758-765
Electronic Edition (link) BibTeX
- Seno Panjaitan, Georg Frey:
Combination of UML Modeling and the IEC 61499 Function Block Concept for the Development of Distributed Automation Systems.
766-773
Electronic Edition (link) BibTeX
- Victor Dubinin, Valeriy Vyatkin, Hans-Michael Hanisch:
Modelling and Verification of IEC 61499 Applications using Prolog.
774-781
Electronic Edition (link) BibTeX
- Goran Cengic, Oscar Ljungkrantz, Knut Akesson:
A Framework for Component Based Distributed Control Software Development Using IEC 61499.
782-789
Electronic Edition (link) BibTeX
- A. Garcia, A. Cenjor, Y. Chang, M. de la Fuente:
An Agent-Oriented Design Methodology for RFID Improved Manufacturing Control.
790-796
Electronic Edition (link) BibTeX
- Nancy Ruiz, Adriana Giret, Vicente J. Botti:
Towards an Agent-based Simulation Tool for Manufacturing Systems.
797-804
Electronic Edition (link) BibTeX
- Yusuke Morihiro, Toshiyuki Miyamoto, Sadatoshi Kumagai:
An Initial Task Assignment Method for Autonomous Distributed Vehicle Systems with Finite Buffer Capacity.
805-812
Electronic Edition (link) BibTeX
- Wojciech Muszynski, Zbigniew A. Banaszak, Izabela Tomczuk-Pirog:
Automated Vehicles' Work Planning in Flexible Manufacturing Systems.
813-818
Electronic Edition (link) BibTeX
- Paulo Leitão, Armando W. Colombo:
Petri net based Methodology for the Development of Collaborative Production Systems.
819-826
Electronic Edition (link) BibTeX
- Jan Chudoba, Libor Preucil, Roman Mázl:
A Control System for Multi-Robotic Communities.
827-832
Electronic Edition (link) BibTeX
- Martin Saska, Martin Macas, Libor Preucil, Lenka Lhotská:
Robot Path Planning using Particle Swarm Optimization of Ferguson Splines.
833-839
Electronic Edition (link) BibTeX
- Naoki Uchiyama, Shoji Takagi, Shigenori Sano, Kazuo Yamazaki:
Robust Contouring Control for Multi-Axis Feed Drive Systems.
840-845
Electronic Edition (link) BibTeX
- P. A. Fernandes Ferreira, João Rogério Caldas Pinto:
Visual Based Predictive Control for a Six Degrees of Freedom Robot.
846-853
Electronic Edition (link) BibTeX
- Yolanda Bolea, Antoni Grau, Juan Gamiz-Caro:
LPV Gain-Scheduled PID for Distributed Motion Control via Ethernet.
854-861
Electronic Edition (link) BibTeX
- Ramon Vilanova:
Revisiting IMC based design of PI/PID controllers for FOPTD Models.
862-869
Electronic Edition (link) BibTeX
- Juan J. Gude, E. Kahoraho, Josu Etxaniz:
Practical aspects of PID controllers: An industrial experience.
870-878
Electronic Edition (link) BibTeX
- Fragiskos A. Batzias:
Rotary Cement Kiln Control for Reducing NOx Emissions to Atmosphere.
879-886
Electronic Edition (link) BibTeX
- Philipp Peti, Roman Obermaisser, Harald Paulitsch:
Investigating Connector Faults in the Time-Triggered Architecture.
887-896
Electronic Edition (link) BibTeX
- Eric Armengaud, Andreas Steininger, Martin Horauer:
Automatic Parameter Identi cation in FlexRay based Automotive Communication Networks.
897-904
Electronic Edition (link) BibTeX
- Thomas Nolte, Hans A. Hansson, Lucia Lo Bello:
Integration of networked subsystems in a resource constrained environment.
905-912
Electronic Edition (link) BibTeX
- Neil C. Audsley, R. Gao, Ameet Patil:
Towards a File System Interface for Mobile Resources in Networked Embedded Systems.
913-920
Electronic Edition (link) BibTeX
- Henning Trsek, Jürgen Jasperneite, Sugun Pradeep Karanam:
A Simulation Case Study of the new IEEE 802.11e HCCA mechanism in Industrial Wireless Networks.
921-928
Electronic Edition (link) BibTeX
- Eduardo De Freitas Rocha Loures, Marco Antonio Busetti de Paula, Jean-Claude Pascal:
Maintenance integration in a control-monitoring architecture based on Petri net with objects. Application to a flexible manufacturing system.
929-936
Electronic Edition (link) BibTeX
- Izabela Tomczuk-Pirog, Robert Wójcik, Zbigniew A. Banaszak:
Decision Support Systems Based on CLP Approach in SMEs.
937-942
Electronic Edition (link) BibTeX
- Oliver Rose:
Implementation of a Simulation-Based Optimizer for Semiconductor Wafer Factories.
943-949
Electronic Edition (link) BibTeX
- Patrcia N. Pena, José E. R. Cury, Stéphane Lafortune:
New Results on Testing Modularity of Local Supervisors using Abstractions.
950-956
Electronic Edition (link) BibTeX
- José Jaime Ruz, Orlando Arevalo, Jesús Manuel de la Cruz, Gonzalo Pajares:
Using MILP for UAVs Trajectory Optimization under Radar Detection Risk.
957-960
Electronic Edition (link) BibTeX
- Vasileios Deligiannis, Stamatis Manesis:
Automata Based Modeling for Batching and Mixing Plants for Concrete.
961-964
Electronic Edition (link) BibTeX
- Enrico S. Canuto, Tommaso D'Anna:
Embedded Model Control and dynamic simulation.
965-968
Electronic Edition (link) BibTeX
- N. Iriondo, M. Marcos, E. Estevez, D. Orive:
Implementing Non-Linear Strategies for PID in IEC 61131-3 ST Language.
969-972
Electronic Edition (link) BibTeX
- Anila Mjeda, Brendan Jackman, Gabriel Leen:
A proposed framework for fine-tuning/training a fuzzy controller.
973-976
Electronic Edition (link) BibTeX
- A. Ochoa, Jesús Ureña, Álvaro Hernández, Manuel Mazo, Carlos De Marziani, María del Carmen Pérez:
Processing Algorithm for obtaining the Impulse Response in a MIMO Ultrasonic System.
977-980
Electronic Edition (link) BibTeX
- E. Emanuel Almeida, Jonathan E. Luntz, Dawn M. Tilbury:
Reconfigurable Logic Control Using IEC 61499 Function Blocks.
981-984
Electronic Edition (link) BibTeX
- Vinicius Menezes de Oliveira, Walter Fetter Lages:
MPC Applied to Motion Control of an Underactuated Brachiation Robot.
985-988
Electronic Edition (link) BibTeX
- Kleanthis Thramboulidis, Nikolaos Papakonstantinou:
An IEC61499 Execution Environment for an aJile-based Field Device.
989-992
Electronic Edition (link) BibTeX
- Maria P. Tzamtzi, Fotis N. Koumboulis:
Towards Squeezing Forces Control for Cooperating Manipulators.
993-996
Electronic Edition (link) BibTeX
- Ioan Filip, Octavian Prostean, Iosif Szeidert, Cristian Vasar, Gabriela Prostean:
Self-tuning Control Using External Integrator Loop for a Synchronous Generator Excitation System.
997-1000
Electronic Edition (link) BibTeX
- L. Rubio, Manuel de la Sen, Asier Ibeas:
Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known Plant.
1001-1004
Electronic Edition (link) BibTeX
- L. Rubio, Manuel de la Sen, Asier Ibeas:
Discrete-Time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive Control.
1005-1008
Electronic Edition (link) BibTeX
- Diego Marcos-Jorquera, Francisco Maciá Pérez, Virgilio Gilart-Iglesias, Alfonso Capella-D'Alton:
Fault Tolerance for Manufacturing Components.
1013-1016
Electronic Edition (link) BibTeX
- Pedro F. Santana, Vasco Santos, José Barata:
DSAAR: A Distributed Software Architecture for Autonomous Robots.
1017-1020
Electronic Edition (link) BibTeX
- Hyeyeon Chang, JongSuk Choi, Munsang Kim:
Experimental research of probabilistic localization of service robots using range image data and indoor GPS system.
1021-1027
Electronic Edition (link) BibTeX
- Leopoldo Armesto, Josep Tornero, L. Domenech:
Improving Self-Localisation of Mobile Robots Based on Asynchronous Monte-Carlo Localization Method.
1028-1035
Electronic Edition (link) BibTeX
- Jorge Costa, Filipe Dias, Rui Araújo:
Simultaneous Localization and Map Building by Integrating a Cache of Features.
1036-1043
Electronic Edition (link) BibTeX
- Jorge Pomares, Pablo Gil, Gabriel J. García, Fernando Torres:
Visual - Force Control and Structured Light Fusion to Improve Recognition of Discontinuities in Surfaces.
1044-1050
Electronic Edition (link) BibTeX
- Jian Li, Yeqiong Song:
Relaxed (m, k)-firm Constraint to Improve Real-time Streams Admission Rate under Non Pre-emptive Fixed Priority Scheduling.
1051-1060
Electronic Edition (link) BibTeX
- Naveen Kalappa, Kristen Acton, Marco Antolovic, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury:
Experimental Determination of Real Time Peer to Peer Communication Characteristics of EtherNet/IP.
1061-1064
Electronic Edition (link) BibTeX
- Paulo Sousa, Luis Lino Ferreira, Mário Alves:
Repeater vs. Bridge-Based Hybrid Wired/Wireless PROFIBUS Networks: a Comparative Performance Analysis.
1065-1072
Electronic Edition (link) BibTeX
- Lucia Lo Bello, Giordano A. Kaczynski, Francesco Sgro, Orazio Mirabella:
A wireless traffic smoother for soft real-time communications over IEEE 802.11 industrial networks.
1073-1079
Electronic Edition (link) BibTeX
- Ewa Figielska:
Combining an Optimizing Method with a Genetic Algorithm to Solve a Flowshop Scheduling Problem with Additional Resources.
1080-1086
Electronic Edition (link) BibTeX
- Hakim Lamara, Laurent Vermeiren, Dominique Roger:
Phi-calculus : A new fuzzy arithmetic.
1087-1094
Electronic Edition (link) BibTeX
- Paulo Salgado, Paulo Afonso:
Decomposition of a Greenhouse Fuzzy Model.
1095-1100
Electronic Edition (link) BibTeX
- Takashi Onoyama, Takuya Maekawa, Sen Kubota, Norihisa Komoda:
GA Applied VRP Solving method for a Cooperative Logistics Network.
1101-1106
Electronic Edition (link) BibTeX
- G. Goulas, V. Barkayannis, S. Gianoulis, C. Gogos, Panayiotis Alefragis, P. Foundas, Christos Valouxis, Stavros A. Koubias, Efthymios Housos:
ERMIS: A Helicopter Taxi Company Software Support System based on GPS, GSM and Web Services.
1107-1114
Electronic Edition (link) BibTeX
- Ryo Imura:
The Role of Networked RFID for Driving the Ubiquitous.
1115-1118
Electronic Edition (link) BibTeX
- Peter Jones:
Networked RFID for use in the Food Chain.
1119-1124
Electronic Edition (link) BibTeX
- Anikó Costa, Luís Gomes:
Partitioning of Petri net models amenable for Distributed Execution.
1129-1132
Electronic Edition (link) BibTeX
- Christoph Sünder, Bernard Favre-Bulle, Valeriy Vyatkin:
Towards an Approach for the Verification of Downtimeless System Evolution.
1133-1136
Electronic Edition (link) BibTeX
- Seok-Won Lee:
An Approach to Swept Volume Generation for NC Machining using Gauss Map.
1137-1140
Electronic Edition (link) BibTeX
- María del Carmen Pérez, Álvaro Hernández, Jesús Ureña, Carlos De Marziani, Ana Jiménez:
FPGA-based Implementation of a Correlator for Kasami Sequences.
1141-1144
Electronic Edition (link) BibTeX
- Marek Obitko, Vladimír Marík:
Integration of Multi-Agent Systems: Architectural Considerations.
1145-1148
Electronic Edition (link) BibTeX
- Juan Jesús García, Jesús Ureña, Manuel Mazo, Cristina Losada, Álvaro Hernández, Carlos De Marziani, Fernando J. Álvarez:
Data Integration by considering spatial diversity in an IR barrier.
1149-1152
Electronic Edition (link) BibTeX
- Fernando Valdés, Felipe Espinosa, AbdelBaset M. H. Awawdeh, Julio Pastor:
Routes for Splitting and Merging Maneuvers of Platoon Followers in Urban Environments.
1153-1156
Electronic Edition (link) BibTeX
- Vera Larionova, Svetlana Larionova:
Development of Hard-Realtime Control Software for Critical Industrial Automation Tasks using Graphical System POLYGON.
1161-1164
Electronic Edition (link) BibTeX
- Uwe Schmidtmann, Gerd von Cölln, Gerhard Kreutz, Jorg Thomaschewski, Rainer Koers, Bodo Wenker:
Specification of Holistic Mechatronic Objects Based on Semantic Web Technology.
1165-1168
Electronic Edition (link) BibTeX
- Daniel Lecking, Oliver Wulf, Bernardo Wagner:
Variable Pallet Pick-Up for Automatic Guided Vehicles in Industrial Environments.
1169-1174
Electronic Edition (link) BibTeX
- Hiroaki Seki, Yoshitsugu Kamiya, Masatoshi Hikizu:
SCARA Type Robot Arm with Mechanically Adjustable Compliant Joints.
1175-1181
Electronic Edition (link) BibTeX
- Christoforos E. Economakos, Fotis N. Koumboulis:
A Safe Set Point Supervisor for MIMO Processes.
1182-1189
Electronic Edition (link) BibTeX
- Artzai Picon, Arantza Bereciartua, Jose Angel Gutierrez, Jose Perez:
3D High Precision Tube Bevel Measurement using laser based Rotating Scanner.
1190-1197
Electronic Edition (link) BibTeX
- Aleksey Bratukhin, Albert Treytl:
Applicability of RFID and Agent-Based Control for Product Identification in Distributed Production.
1198-1205
Electronic Edition (link) BibTeX
- Paolo Ferrari, Alessandra Flammini, Daniele Marioli, S. Rosa, Andrea Taroni, C. Cattaneo, Cathryn Manduca:
GDNET: a Specific Approach to Distributed Input/Output Synchronization for Plastic Machinery.
1206-1213
Electronic Edition (link) BibTeX
- Maxim Lobashov, Thilo Sauter:
Vertical Communication from the Enterprise Level to the Factory Floor - Integrating Fieldbus and IP-based Networks.
1214-1221
Electronic Edition (link) BibTeX
- Valter Filipe Silva, Joaquim Castro Ferreira, José Alberto Fonseca:
Dynamic Topology Management in CAN.
1222-1229
Electronic Edition (link) BibTeX
- Luís Gomes, Anikó Costa:
Removing ill-structured arcs in Hierarchical and Concurrent State Diagrams.
1230-1237
Electronic Edition (link) BibTeX
- Jürgen Anke, Klaus Kabitzsch:
Cost-based Deployment Planning for Components in Smart Item Environments.
1238-1245
Electronic Edition (link) BibTeX
- Ramon Piedrafita Moreno, José Luis Villarroel Salcedo:
Petri Nets and Java. Real-Time Control of a flexible manufacturing cell.
1246-1253
Electronic Edition (link) BibTeX
- Manuel Coutinho, Carlos Almeida, José Rufino:
VITRAL - A text mode window manager for real-time embedded kernels.
1254-1260
Electronic Edition (link) BibTeX
- Juan Antonio Gil-Martinez-Abarca, Francisco Maciá Pérez, Diego Marcos-Jorquera, Virgilio Gilart-Iglesias:
Wake on LAN over Internet as Web Service.
1261-1268
Electronic Edition (link) BibTeX
- Goran Cengic, Oscar Ljungkrantz, Knut Akesson:
Formal Modeling of Function Block Applications Running in IEC 61499 Execution Runtime.
1269-1276
Electronic Edition (link) BibTeX
- Tanvir Hussain, Georg Frey:
UML-based Development Process for IEC 61499 with Automatic Test-case Generation.
1277-1284
Electronic Edition (link) BibTeX
- Oliver Hummer, Christoph Sünder, Alois Zoitl, Thomas Strasser, Martijn N. Rooker, Gerhard Ebenhofer:
Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499.
1285-1292
Electronic Edition (link) BibTeX
- Mohamed Khalgui, Xavier Rebeuf, Françoise Simonot-Lion:
Component based deployment of industrial control systems: a hybrid scheduling approach.
1293-1300
Electronic Edition (link) BibTeX
- Marco Colla, Alessandro Brusaferri, Emanuele Carpanzano:
Applying the IEC-61499 Model to the Shoe Manufacturing Sector.
1301-1308
Electronic Edition (link) BibTeX
- Kleanthis Thramboulidis:
Design Alternatives in the IEC 61499 Function Block Model.
1309-1316
Electronic Edition (link) BibTeX
- Hirohisa Furuta, Akira Ishihara, Takayuki Yamaoka:
Reusing a System Testing Process Using with a Model.
1317-1320
Electronic Edition (link) BibTeX
- Fragiskos A. Batzias, Christina G. Siontorou:
Moving from Spontaneous to Cooperative/Concurrent R&D in Biotechnology - The Case of Biosensors.
1321-1328
Electronic Edition (link) BibTeX
- Michael Kuhl, Reimund Neugebauer:
Quality and Process Control of Nd: YAG - Laser Welding Using fuzzy Pattern Recognition Techniques for Multisensor Systems.
1329-1332
Electronic Edition (link) BibTeX
- Kenzo Kurihara, Nobuyuki Nishiuchi, Manabu Nagai, Kazuaki Masuda:
Branching Probabilities Planning of Stochastic Network for Project Duration Planning.
1333-1339
Electronic Edition (link) BibTeX
- Mohammed Bani Younis, Georg Frey:
A Formal Method Based Re-Implementation Concept for PLC Programs and Its Application.
1340-1347
Electronic Edition (link) BibTeX
- Faicel Hnaien, Alexandre Dolgui:
A Supply Planning Model for Multilevel Assembly Systems Under Random Lead Times.
1348-1351
Electronic Edition (link) BibTeX
Copyright © Sat May 16 23:10:58 2009
by Michael Ley (ley@uni-trier.de)
