Volume 34,
Number 1,
January 2002
Volume 34,
Number 2,
February 2002
- Bo Hyoung Kim, Byoung Kyu Choi:
Machining efficiency comparison direction-parallel tool path with contour-parallel tool path.
89-95
Electronic Edition (link) BibTeX
- Yan-Tao Li, Shi-Min Hu, Jia-Guang Sun:
A constructive approach to solving 3-D geometric constraint systems using dependence analysis.
97-108
Electronic Edition (link) BibTeX
- H. Zhu, C. H. Menq:
B-Rep model simplification by automatic fillet/round suppressing for efficient automatic feature recognition.
109-123
Electronic Edition (link) BibTeX
- Hon-Yuen Tam, Haiyin Xu, Zude Zhou:
Iso-planar interpolation for the machining of implicit surfaces.
125-136
Electronic Edition (link) BibTeX
- Fehmi Cirak, Michael J. Scott, Erik K. Antonsson, Michael Ortiz, Peter Schröder:
Integrated modeling, finite-element analysis, and engineering design for thin-shell structures using subdivision.
137-148
Electronic Edition (link) BibTeX
- Jianbing Huang, Chia-Hsiang Menq:
Combinatorial manifold mesh reconstruction and optimization from unorganized points with arbitrary topology.
149-165
Electronic Edition (link) BibTeX
- Les A. Piegl, Wayne Tiller:
Algorithm for finding all k nearest neighbors.
167-172
Electronic Edition (link) BibTeX
Volume 34,
Number 3,
March 2002
- Djordje Brujic, Mihailo Ristic, Iain Ainsworth:
Measurement-based modification of NURBS surfaces.
173-183
Electronic Edition (link) BibTeX
- K.-Z. Chen, X.-A. Feng, Q.-S. Lu:
Intelligent location-dimensioning of cylindrical surfaces in mechanical parts.
185-194
Electronic Edition (link) BibTeX
- Yoonhwan Woo, Hiroshi Sakurai:
Recognition of maximal features by volume decomposition.
195-207
Electronic Edition (link) BibTeX
- G. V. V. Ravi Kumar, K. G. Shastry, B. G. Prakash:
Computing non-self-intersecting offsets of NURBS surfaces.
209-228
Electronic Edition (link) BibTeX
- Syh-Shiuh Yeh, Pau-Lo Hsu:
Adaptive-feedrate interpolation for parametric curves with a confined chord error.
229-237
Electronic Edition (link) BibTeX
- Li Chen, Jian Pu, Xiankui Wang:
A general model for machinable features and its application to machinability evaluation of mechanical parts.
239-249
Electronic Edition (link) BibTeX
- C. Greg Jensen, W. E. Red, J. Pi:
Tool selection for five-axis curvature matched machining.
251-266
Electronic Edition (link) BibTeX
Volume 34,
Number 4,
April 2002
- Mahadevan Balasubramaniam, Stephen Ho, Sanjay E. Sarma, Yoshitaka Adachi:
Generation of collision-free 5-axis tool paths using a haptic surface.
267-279
Electronic Edition (link) BibTeX
- K. P. Karunakaran, Shivamurthy Dibbi, P. Vivekananda Shanmuganathan, D. Satyanarayana Raju, Srinivasarao Kakaraparti:
Efficient stock cutting for laminated manufacturing.
281-298
Electronic Edition (link) BibTeX
- S. C. Park, Y. C. Chung:
Offset tool-path linking for pocket machining.
299-308
Electronic Edition (link) BibTeX
- G. H. Liu, Y. S. Wong, Y. F. Zhang, Han Tong Loh:
Adaptive fairing of digitized point data with discrete curvature.
309-320
Electronic Edition (link) BibTeX
- Weidong Geng, Jingbin Wang, Yiyang Zhang:
Embedding visual cognition in 3D reconstruction from multi-view engineering drawings.
321-336
Electronic Edition (link) BibTeX
- Deok-Soo Kim, Joonghyun Ryu, Hyun-Chan Lee, Hayong Shin:
The conversion of a dynamic B-spline curve into piecewise polynomials in power form.
337-345
Electronic Edition (link) BibTeX
Volume 34,
Number 5,
April 2002
Volume 34,
Number 6,
May 2002
Volume 34,
Number 7,
June 2002
Volume 34,
Number 8,
July 2002
Volume 34,
Number 9,
August 2002
Volume 34,
Number 10,
September 2002
- Imre Horváth, Dong-Yol Yang:
Rapid technologies: solutions for today and tomorrow.
679-682
Electronic Edition (link) BibTeX
- Seok-Hyung Bae, Byoung Kyu Choi:
NURBS surface fitting using orthogonal coordinate transform for rapid product development.
683-690
Electronic Edition (link) BibTeX
- Seok-Hee Lee, Ho-Chan Kim, Sung-Min Hur, Dong-Yol Yang:
STL file generation from measured point data by segmentation and Delaunay triangulation.
691-704
Electronic Edition (link) BibTeX
- Y. K. Siu, S. T. Tan:
Modeling the material grading and structures of heterogeneous objects for layered manufacturing.
705-716
Electronic Edition (link) BibTeX
- R. I. Campbell, M. Martorelli, H. S. Lee:
Surface roughness visualisation for rapid prototyping models.
717-725
Electronic Edition (link) BibTeX
- Stephen P. Radzevich:
Conditions of proper sculptured surface machining.
727-740
Electronic Edition (link) BibTeX
- Junghoon Hur, Kunwoo Lee, Zhu-hu, Jongwon Kim:
Hybrid rapid prototyping system using machining and deposition.
741-754
Electronic Edition (link) BibTeX
- N. Shyamsundar, Rajit Gadh:
Collaborative virtual prototyping of product assemblies over the Internet.
755-768
Electronic Edition (link) BibTeX
Volume 34,
Number 11,
September 2002
Volume 34,
Number 12,
October 2002
Volume 34,
Number 13,
November 2002
- Qun Lin, Jon G. Rokne:
Approximation by fat arcs and fat biarcs.
969-979
Electronic Edition (link) BibTeX
- Lihui Wang, Weiming Shen, Helen Xie, Joseph Neelamkavil, Ajit Pardasani:
Collaborative conceptual design - state of the art and future trends.
981-996
Electronic Edition (link) BibTeX
- W. K. Chiu, S. T. Tan:
An automatic method for controlling the centre of gravity of a model.
997-1010
Electronic Edition (link) BibTeX
- Attila Csabai, Ian Stroud, Paul C. Xirouchakis:
Container spaces and functional features for top-down 3D layout design.
1011-1035
Electronic Edition (link) BibTeX
- Xunnian Yang:
Efficient circular arc interpolation based on active tolerance control.
1037-1046
Electronic Edition (link) BibTeX
- A. Bowyer:
LEDA - a platform for combinatorial and geometric computing Kurt Mehlhorn and Stefan Näher, Cambridge University Press, Cambridge, UK, 1999, 1018 pages, ISBN 0-521-56329-1.
1047-1048
Electronic Edition (link) BibTeX
- Allan D. Spence:
Machine design - a classical mechanical engineering textbook: Machine design - A CAD Approach; A.D. Dimarogonas (Ed.); Wiley, New York, 2001, 996 pages, ISBN 0-471-31528-1.
1049-1050
Electronic Edition (link) BibTeX
- Cecil G. Armstrong:
A Fine Mesh BookMesh Generation: application to finite elements: Pascal Jean Frey, Paul-Louis George, Hermes Science Europe, Oxford & Paris, 2000, 814 pages, ISBN 1-903398-00-2.
1051
Electronic Edition (link) BibTeX
Volume 34,
Number 14,
December 2002
- Reiner Anderl, Jon Owen:
Editorial.
1053-1054
Electronic Edition (link) BibTeX
- Gregory L. Smith:
Utilization of STEP AP 210 at The Boeing Company.
1055-1062
Electronic Edition (link) BibTeX
- Franca Giannini, Marina Monti, Domenico Biondi, Flavio Bonfatti, Paola Daniela Monari:
A modelling tool for the management of product data in a co-design environment.
1063-1073
Electronic Edition (link) BibTeX
- Türkay Dereli, I. Hüseyin Filiz:
A note on the use of STEP for interfacing design to process planning.
1075-1085
Electronic Edition (link) BibTeX
- X. F. Zha, H. Du:
A PDES/STEP-based model and system for concurrent integrated design and assembly planning.
1087-1110
Electronic Edition (link) BibTeX
- Michael J. Pratt, A. D. Bhatt, Debasish Dutta, Kevin W. Lyons, Lalit Patil, Ram D. Sriram:
Progress towards an international standard for data transfer in rapid prototyping and layered manufacturing.
1111-1121
Electronic Edition (link) BibTeX
Copyright © Sat May 16 23:52:07 2009
by Michael Ley (ley@uni-trier.de)
