Volume 24,
Number 1,
March 2008
- Fehmi Cirak, Julian C. Cummings:
Generic programming techniques for parallelizing and extending procedural finite element programs.
1-16
Electronic Edition (link) BibTeX
- Anil Kumar Karanam, Kenneth E. Jansen, Christian H. Whiting:
Geometry based pre-processor for parallel fluid dynamic simulations using a hierarchical basis.
17-26
Electronic Edition (link) BibTeX
- Sabeur Bettaieb, Frédéric Noël:
A generic architecture to synchronise design models issued from heterogeneous business tools: towards more interoperability between design expertises.
27-41
Electronic Edition (link) BibTeX
- Arpan Biswas, Steve J. Fenves, Vadim Shapiro, Ram Sriram:
Representation of heterogeneous material properties in the Core Product Model.
43-58
Electronic Edition (link) BibTeX
- Glaucio H. Paulino, Waldemar Celes Filho, Rodrigo Espinha, Zhengyu (Jenny) Zhang:
A general topology-based framework for adaptive insertion of cohesive elements in finite element meshes.
59-78
Electronic Edition (link) BibTeX
- Les A. Piegl, Khairan Rajab, Volha Smarodzinana:
Curve interpolation with directional constraints for engineering design.
79-85
Electronic Edition (link) BibTeX
- Ping Yang:
A systematic approach on computational analysis and optimization design: for a nonlinear coupling shock absorber.
87-96
Electronic Edition (link) BibTeX
Volume 24,
Number 2,
June 2008
- Les A. Piegl, Wayne Tiller:
Fitting NURBS spherical patches to measured data.
97-106
Electronic Edition (link) BibTeX
- R. Harris, T. Impelluso:
Virtual stress testing machine and the cyber-infrastructure.
107-117
Electronic Edition (link) BibTeX
- Gen Li, Xiuzi Ye, Sanyuan Zhang:
An algorithm for filling complex holes in reverse engineering.
119-125
Electronic Edition (link) BibTeX
- S. Swaddiwudhipong, E. Harsono, J. Hua, Z. S. Liu:
Reverse analysis via efficient artificial neural networks based on simulated Berkovich indentation considering effects of friction.
127-134
Electronic Edition (link) BibTeX
- Saeed Iqbal, Graham F. Carey:
Performance of parallel computations with dynamic processor allocation.
135-143
Electronic Edition (link) BibTeX
- Elina Madetoja, Eeva-Kaisa Rouhiainen, Pasi Tarvainen:
A decision support system for paper making based on simulation and optimization.
145-153
Electronic Edition (link) BibTeX
- K. H. Shivanna, N. M. Grosland, M. E. Russell, D. R. Pedersen:
Diarthrodial joint contact models: finite element model development of the human hip.
155-163
Electronic Edition (link) BibTeX
- Kyle K. Chand, Lori Freitag Diachin, Xiaolin Li, Carl Ollivier-Gooch, E. Seegyoung Seol, Mark S. Shephard, Timothy Tautges, Harold Trease:
Toward interoperable mesh, geometry and field components for PDE simulation development.
165-182
Electronic Edition (link) BibTeX
- David J. Giblin, Kazem Kazerounian:
Updating workpiece geometry using robotic sensor information gathered during contact tasks.
183-192
Electronic Edition (link) BibTeX
Volume 24,
Number 3,
September 2008
Special Issue:
5th Symposium on Trends in Unstructured Mesh Generation in 2006
- Steven J. Owen:
Preface to engineering with computers special edition on trends in unstructured mesh generation.
193-194
Electronic Edition (link) BibTeX
- Jason F. Shepherd, Chris R. Johnson:
Hexahedral mesh generation constraints.
195-213
Electronic Edition (link) BibTeX
- Yasumi Kawamura, Md. Shahidul Islam, Yoichi Sumi:
A strategy of automatic hexahedral mesh generation by using an improved whisker-weaving method with a surface mesh modification procedure.
215-229
Electronic Edition (link) BibTeX
- J. Yin, C. Teodosiu:
Constrained mesh optimization on boundary.
231-240
Electronic Edition (link) BibTeX
- Matthew L. Staten, Steven E. Benzley, Michael Scott:
A methodology for quadrilateral finite element mesh coarsening.
241-251
Electronic Edition (link) BibTeX
- Chakib Bennis, Houman Borouchaki, N. Flandrin:
3D conforming power diagrams for radial LGR in CPG reservoir grids.
253-265
Electronic Edition (link) BibTeX
- Onkar Sahni, Kenneth E. Jansen, Mark S. Shephard, Charles A. Taylor, Mark W. Beall:
Adaptive boundary layer meshing for viscous flow simulations.
267-285
Electronic Edition (link) BibTeX
- Boris Clémençon, Houman Borouchaki, Patrick Laug:
Ridge extraction and its application to surface meshing.
287-304
Electronic Edition (link) BibTeX
- William Roshan Quadros:
An approach for extracting non-manifold mid-surfaces of thin-wall solids using chordal axis transform.
305-319
Electronic Edition (link) BibTeX
Volume 24,
Number 4,
October 2008
- Guoqun Zhao, Hongmei Zhang, Lianjun Cheng:
Geometry-adaptive generation algorithm and boundary match method for initial hexahedral element mesh.
321-339
Electronic Edition (link) BibTeX
- Sandhya Mangala, Terry Wilmarth, Sayantan Chakravorty, Nilesh Choudhury, Laxmikant V. Kalé, Philippe H. Geubelle:
Parallel adaptive simulations of dynamic fracture events.
341-358
Electronic Edition (link) BibTeX
- Sai Zeng, Russell S. Peak, Angran Xiao, Suresh Sitaraman:
ZAP: a knowledge-based FEA modeling method for highly coupled variable topology multi-body problems.
359-381
Electronic Edition (link) BibTeX
- Peter Wriggers, Marina Siplivaya, Irina Joukova, Roman Slivin:
Intelligent support of the preprocessing stage of engineering analysis using case-based reasoning.
383-404
Electronic Edition (link) BibTeX
- Prakash Kripakaran, Abhinav Gupta, Vernon C. Matzen:
Computational framework for remotely operable laboratories.
405-415
Electronic Edition (link) BibTeX
- Bhautik Joshi, Andriy Fedorov, Nikos Chrisochoides, Simon K. Warfield, Sébastien Ourselin:
A quantitative assessment of approaches to mesh generation for surgical simulation.
417-430
Electronic Edition (link) BibTeX
Copyright © Sat May 16 23:58:57 2009
by Michael Ley (ley@uni-trier.de)
